这个直接用官方给的demo就可以
现在说个需求哈，是当初一个人给提出的需求
例如存入的号码姓名 号码 1 100862 10010... .... 例如存入的号码01 0501 05代表所有的号码循环拨打5次 01代表延时1小时后重复GPIO4控制打电话(低电平有效)开机以后先读取手机卡里面的信息,筛选出来姓名1-99 和对应的号码取出01对应的次数 5 时间间隔 1小时读取完成以后如果GPIO4为低电平,先拨打姓名1对应的号码,如果后面还有2 间隔50S就会再拨打2对应的号码,如果还有3,4,5....依次排着拨打顺序拨打完一遍 次数加1 顺序拨打5次 延时1小时 然后 循环
直接源码
module(...,package.seeall)require"cc"require"pb"require"sys"require"net"require"pins"require"common"--[[GPIO4低电平拨打电话GPIO5,GPIO6,GPIO7信号强度指示]]local function print(...) _G.print("testCall",...)endlocal ReadTelephoneTable={};local ReadTelephoneTableCopy={};local ReadTelephoneCnt=1;local ReadErr=0;local LoopCnt=0;local DelayHour=0;local CallReadyFlage=0;local j=1;local CallMax = 0;local CallCnt = 0;local DelayCallValue = 50000;local InputState = 0;local ReadTelephoneSuccess = 0;--是否读取号码完成InputKey = pio.P0_4;--输入按钮Led1 = pio.P0_5;--Led1Led2 = pio.P0_6;--Led2Led3 = pio.P0_7;--Led3pio.pin.setdir(pio.OUTPUT,InputKey)pio.pin.setval(1,InputKey)pio.pin.setdir(pio.OUTPUT,Led1)pio.pin.setval(1,Led1)pio.pin.setdir(pio.OUTPUT,Led2)pio.pin.setval(1,Led2)pio.pin.setdir(pio.OUTPUT,Led3)pio.pin.setval(1,Led3)function ReadTelephone() pb.read(ReadTelephoneCnt, readcb)end--[[小于70小时,大于35小时使用]]function Delay35Hour() sys.timerStart(CallTelephoneLoop,(DelayHour-35) * 60 * 60 * 1000) end--[[小于100小时,大于70小时使用]]function Delay35HourA() sys.timerStart(CallTelephoneLoop,(DelayHour-70) * 60 * 60 * 1000)end--[[小于100小时,大于70小时使用]]function Delay35HourB() sys.timerStart(Delay35HourA,35 * 60 * 60 * 1000)end--[[拨打电话]]function CallTelephoneLoop() if j<= CallMax and CallMax>=1 and DelayHour >= 1 and LoopCnt>=1 then cc.dial(ReadTelephoneTableCopy[j]); sys.timerStart(cc.hangUp,30000,ReadTelephoneTableCopy[j]) print("拨打::"..ReadTelephoneTableCopy[j]); j=j+1; if j > CallMax then--循环了一遍 j = 1; CallCnt = CallCnt + 1; print("循环次数:"..CallCnt); end if CallCnt >= LoopCnt then--循环了设置的次数 CallCnt = 0; print("开始延时:"..DelayHour.."小时"); if DelayHour <=35 then sys.timerStart(CallTelephoneLoop,DelayHour * 60 * 60 * 1000) elseif DelayHour <=70 then sys.timerStart(Delay35Hour,35 * 60 * 60 * 1000) elseif DelayHour <=100 then sys.timerStart(Delay35HourB,35 * 60 * 60 * 1000) end else print("循环"); sys.timerStart(CallTelephoneLoop,DelayCallValue) end endend--[[读取号码]]function readcb(result,name,number) if result == true then ReadTelephoneCnt = ReadTelephoneCnt +1; print(result,name,number); print("ReadTelephoneCnt"..ReadTelephoneCnt); if string.len(name)>0 then ReadErr = 0; if string.len(number)>0 then ReadErr = 0; ReadTelephoneTable[name] = number; end else if string.len(number)==0 and string.len(name)==0 then print("ReadErr = ReadErr +1"); ReadErr = ReadErr +1; if ReadErr>5 then ReadErr = 0; sys.timerStop(ReadTelephone,1); print("timerStop"); local i=1; for key,value in pairs(ReadTelephoneTable) do print(key,value) if key == "01" then LoopCnt = tonumber(string.sub(value,1,2)) if LoopCnt>99 or LoopCnt<1 then LoopCnt = 0; end DelayHour = tonumber(string.sub(value,3,4)) if DelayHour>99 or DelayHour<1 then DelayHour = 0; end print("DelayHour"..DelayHour) else print("key"..key) if tonumber(key)~=nil and tonumber(key) <99 and tonumber(key)>0 then ReadTelephoneTableCopy[i] = value; i = i + 1; end end end CallMax = i - 1; ReadTelephoneSuccess = 1; end end end if string.len(number)>0 then ReadErr = 0; print("string.len(number)>0 ReadErr = 0"); end else print(result,name,number); endendlocal InputCnt = 0;local cnt = 0;function InputShowLed() if pio.pin.getval(InputKey) == 0 then InputCnt = InputCnt +1; if InputCnt>6 and InputState==0 then InputCnt = 0; if ReadTelephoneSuccess == 1 then InputState = 1; j=1; CallCnt = 0; sys.timerStopAll(CallTelephoneLoop) sys.timerStart(CallTelephoneLoop,1) end end else InputCnt = 0; InputState = 0; sys.timerStopAll(CallTelephoneLoop) end cnt = cnt +1; if cnt>100 then cnt = 0; print("信号强度:"..net.getRssi()) if net.getRssi() == 0 then pio.pin.setval(0,Led1);--用三个指示灯指示信号的强度 pio.pin.setval(0,Led2); pio.pin.setval(0,Led3); elseif net.getRssi()<10 then pio.pin.setval(0,Led1); pio.pin.setval(0,Led2); pio.pin.setval(1,Led3); elseif net.getRssi()<20 then pio.pin.setval(0,Led1); pio.pin.setval(1,Led2); pio.pin.setval(1,Led3); elseif net.getRssi()>20 then pio.pin.setval(1,Led1); pio.pin.setval(1,Led2); pio.pin.setval(1,Led3); end endend--[[可以打电话]]local function CallReadyMethod() CallReadyFlage = 1; print("*****************************CALL_READY*****************************");end---对方接听-- string num，建立通话的对方号码local function connected(num) print("主动结束通话") cc.hangUp(num)end--结束通话local function disconnected(para) print("disconnected:"..(para or "nil"))endsys.timerLoopStart(ReadTelephone,1000,1)sys.subscribe("CALL_CONNECTED",connected)sys.subscribe("CALL_READY",CallReadyMethod)sys.subscribe("CALL_DISCONNECTED",disconnected)sys.timerLoopStart(InputShowLed,10)cc.dtmfDetect(true)
其实逻辑处理也挺复杂的
源码打包出售
剩余的大家自己去研究哈，也可以按照规定的存储手机卡号码，看看拨打情况
资料源码链接
链接： 密码：p9qs
基础教程源码链接如果失效,请在淘宝介绍中下载,由于链接还是失效,请联系卖家,谢谢